Von Hifi-Studio Falkensee
http://www.berlin-hifi.de
Zurück zu Neuheiten
http://www.berlin-hifi.de
Produktgruppe: Vollverstärker
neue Referenz :
08.08.2016
der neue NAT - Single Ended mit 2x 50 Watt sinus.
Dieser Triodenverstärker ist mit einem großen extra Netzteil
aufgebaut und kann mit vielfach teureren Vorverstärker/Endverstärkerkombinationen mit halten.
Technische Daten :
Type Single Ended Tube Base Zero Global Feedback
Power 50 W @ 8 ohms
Frequency Response 10 to 60 kHz, -3 dB; 20Hz to 20kHz, +/-0,5dB
Noise 90 dB IHF reference to 1W
Gain 35 dB (X 55) Phase status: non-inverted (0 degree)
THD & N < 0.1 %
Input Impedance >15 kohms
Output Impedance 10 reference to 16ohms load @zero feedback)
Stereo Separation >95 dB @ 10 kHz
Tube Complement 2 x 6N23P (E88CC) & 2 x GM70 per unit
Power Requirements 100VAC to 240VAC (50 to 60 Hz), max. 370 VA
Dimensions 19\" (483 mm) wide ´ 15.7\" (400 mm) deep ´ 10.2\" (260 mm) high
NETWeight (Control Unit) approx. 110 lbs (60 kg) unpacked
TOTAL Weight approx. 133 lbs ( 70kg) total with transport wooden box
Design Features
- single ended type - integrated amplifier
- zero feedback design
- triode direct-heated output type
- 50 W of pure class A
- full dual mono construction
- custom designed 1.000W encapsulated power transformer
- full stabilisation for all amplifier stages
- two tubes (NOS) for driver purposes
- separate toroidal transformer for digital control
- dot-matrix display (15 level of intensity with turn off light mode)
- remote control made from solid block of aluminium
- automatic bias
- adaptive bias (to control dissipation of the output stage)
- standby function
- relay (silent type) attenuation network
- all aluminium modulated chassis
- teflon isolated connectors
vorführbereit auch gegen unsere alte Vollverstärkerreferenz Audio Note Jinro
VK Preis 7.990 Euro
Dieser Triodenverstärker ist mit einem großen extra Netzteil
aufgebaut und kann mit vielfach teureren Vorverstärker/Endverstärkerkombinationen mit halten.
Technische Daten :
Type Single Ended Tube Base Zero Global Feedback
Power 50 W @ 8 ohms
Frequency Response 10 to 60 kHz, -3 dB; 20Hz to 20kHz, +/-0,5dB
Noise 90 dB IHF reference to 1W
Gain 35 dB (X 55) Phase status: non-inverted (0 degree)
THD & N < 0.1 %
Input Impedance >15 kohms
Output Impedance 10 reference to 16ohms load @zero feedback)
Stereo Separation >95 dB @ 10 kHz
Tube Complement 2 x 6N23P (E88CC) & 2 x GM70 per unit
Power Requirements 100VAC to 240VAC (50 to 60 Hz), max. 370 VA
Dimensions 19\" (483 mm) wide ´ 15.7\" (400 mm) deep ´ 10.2\" (260 mm) high
NETWeight (Control Unit) approx. 110 lbs (60 kg) unpacked
TOTAL Weight approx. 133 lbs ( 70kg) total with transport wooden box
Design Features
- single ended type - integrated amplifier
- zero feedback design
- triode direct-heated output type
- 50 W of pure class A
- full dual mono construction
- custom designed 1.000W encapsulated power transformer
- full stabilisation for all amplifier stages
- two tubes (NOS) for driver purposes
- separate toroidal transformer for digital control
- dot-matrix display (15 level of intensity with turn off light mode)
- remote control made from solid block of aluminium
- automatic bias
- adaptive bias (to control dissipation of the output stage)
- standby function
- relay (silent type) attenuation network
- all aluminium modulated chassis
- teflon isolated connectors
vorführbereit auch gegen unsere alte Vollverstärkerreferenz Audio Note Jinro
VK Preis 7.990 Euro