Der Verkäufer ist für dieses Inserat und dessen Inhalte verantwortlich.
TANGO-TRANS Hirata Tango #10275, special 500H 200mA, for electrostatic Stax SR-X9000
Preis: 2.050,00 €
| Neugerät
Produktdetails
- Produktgruppe
- Audio-Röhren
- Hersteller
- TANGO-TRANS
- Funktion
- Keine Angabe
- Alter
- 30 Jahre
- Gebrauchszustand
- neu
- Optik
- Neugerät
- Zubehör
- komplett mit OVP
- Preis
- 2.050,00 €
- Weitere Informationen
- http://tango-trans.com/en/
Beschreibung
These Inductors are marked with the numeric model #10275, typical of the special Tango series made on specific customer request (such as those made for Shishido which have indeed a numerical identifier).
The silkscreened bottom plates are not present, because Tango did not supply them when they made a few units.
These are in fact rare pieces, designed and handcrafted by Hirata Tango.
The Tango #10275 are intended for use with tubes such as the 211, 801, RL12T15, etc.
So the #10275 can work with 1250V and 100mA per side... and thanks to the Hirata Tango's masterful construction, they can handle extremely high tension swings with extended frequency response.
The two 125H windings of the #10275, can also be configured to make a 1:1 transformer or 1:2 autotransformer.
Among the many possible uses, the one dedicated to electrostatic headphones is truly superlative. Whether the #10275 is used passively, to interface in parafeed with a typical single-ended tube amplifier. Whether in case the #10275 is used as anode load with two 801 tubes powered at 580V (see the images with the conceptual schematic, which I sketched by hand on the smartphone).
The silkscreened bottom plates are not present, because Tango did not supply them when they made a few units.
These are in fact rare pieces, designed and handcrafted by Hirata Tango.
The Tango #10275 are intended for use with tubes such as the 211, 801, RL12T15, etc.
So the #10275 can work with 1250V and 100mA per side... and thanks to the Hirata Tango's masterful construction, they can handle extremely high tension swings with extended frequency response.
The two 125H windings of the #10275, can also be configured to make a 1:1 transformer or 1:2 autotransformer.
Among the many possible uses, the one dedicated to electrostatic headphones is truly superlative. Whether the #10275 is used passively, to interface in parafeed with a typical single-ended tube amplifier. Whether in case the #10275 is used as anode load with two 801 tubes powered at 580V (see the images with the conceptual schematic, which I sketched by hand on the smartphone).
Verkäufer:
- Versand aus Italien (41121)
- Käufer zahlt Versand
- Versand weltweit
Zahlungsmethoden
- Überweisung
- PayPal
Inserats-ID
2521015248
Angebotszeitraum- Start:
- 20.11.2024 - 11:14
- Ende:
- 19.01.2025 - 11:14
129 mal in 36 Tag(en)
