Von REHIFI AB
http://www.rehifi.se
Back to news
http://www.rehifi.se
Product category: Power Amplifier
Luxman M-6000
05.10.2012
The M-6000 is so big, so heavy, so powerful and so good.
LUX\\\'s had its 50th anniversary in 1975 and called on Tim de Paravinci to design some \\\"ultra\\\" components : the M-6000 and its C-1000 preamp companion.
The circuit of the M-6000 is a 2-stage constant current differential amp ending in triple push-pull pure complementary OCL output with an emitter-follower in between the differential driver stage in Class A and the output stage in Class B.
The dual power-supply, the gigantesque power-supply, feeds the circuits with two 1kW transformers and four 20,000µF / 100V caps and separate windings used for the driver and output stages
The M-6000, visually, is simply stunning and its design is on par with the circuit, perhaps even better - that says a lot.
Power Output 300 watts minimum continuous per
channel, into 8Ù loads, from 20Hz to 20kHz, at no more than 0.05% total hamonic distortion.
Rated I.M. (8Ù 300W, 60Hz:7kHz=4:1) no more than 0.05% Frequency Response 5Hz-60.000Hz (±1dB)
Signal-to-Noise Ratio (IHF, A-weighted, input shorted)
100dB iput Sensitivity 1.25V Cross Talk at 20kHz) Damping Factor (8Ù) 100 Power Consumption 50VA (at no signal), 1.3KVA (at 8Ù loads maximum output)
Additional Features VU meter, LED peak level indicator, Muting function, Remote controlable power on/off switch, four protection circuits (D.C. drift, temperature, over current, individual power TR fuse)
Dimentions 570mm(W) x 425mm(D) x 220mm(H)
Weight Net 52kgs Gross 70kgs
LUX\\\'s had its 50th anniversary in 1975 and called on Tim de Paravinci to design some \\\"ultra\\\" components : the M-6000 and its C-1000 preamp companion.
The circuit of the M-6000 is a 2-stage constant current differential amp ending in triple push-pull pure complementary OCL output with an emitter-follower in between the differential driver stage in Class A and the output stage in Class B.
The dual power-supply, the gigantesque power-supply, feeds the circuits with two 1kW transformers and four 20,000µF / 100V caps and separate windings used for the driver and output stages
The M-6000, visually, is simply stunning and its design is on par with the circuit, perhaps even better - that says a lot.
Power Output 300 watts minimum continuous per
channel, into 8Ù loads, from 20Hz to 20kHz, at no more than 0.05% total hamonic distortion.
Rated I.M. (8Ù 300W, 60Hz:7kHz=4:1) no more than 0.05% Frequency Response 5Hz-60.000Hz (±1dB)
Signal-to-Noise Ratio (IHF, A-weighted, input shorted)
100dB iput Sensitivity 1.25V Cross Talk at 20kHz) Damping Factor (8Ù) 100 Power Consumption 50VA (at no signal), 1.3KVA (at 8Ù loads maximum output)
Additional Features VU meter, LED peak level indicator, Muting function, Remote controlable power on/off switch, four protection circuits (D.C. drift, temperature, over current, individual power TR fuse)
Dimentions 570mm(W) x 425mm(D) x 220mm(H)
Weight Net 52kgs Gross 70kgs