1421xz Uithoorn
Netherlands
The seller is responsible for this advert and its content.
Conrad Johnson ET 6 Special Edition incl. Phono DEMO
Product information
- Product category
- Tube-Preamp
- Manufacturer
- Conrad Johnson
- Function
- flawless
- Age
- 2 years According to distributor
- Usage state
- Exhibit
- Appearance
- as good as new
- Accessories
- complete with original box
- Color
- champagne
- Original price
- 9,990.00 €
- Price
- 5,499.00 €
- More information
- http://www.conradjohnson.com/
Description
A really very good preamp called the baby GAT S2, for a third of that money. Can be auditioned on appointment at your place or in our studio in Uithoorn, The Netherlands!
We bought this Demo from the distributor. Normal price € 9.990,- now available at € 5.499,-
Important signal path capacitors are replaced by CJD’s own Teflon devices, and metal film resistors of super high tolerances replace the standard resistors on the PCB.
“The phono stage is a bit of a honey for an on-board design. Not only does it have provision for a wide range of cartridges, it’s extremely quiet in use, and deeply musically satisfying. It’s a lot more than simply an afterthought, and a separate phono preamplifier this good costs thousands in its own right”.
ET6SE Preamplifier Specifications
Gain: 25 db
Maximum output: 20 Vrms
Output impedance: 100 ohms
Distortion: less than .15% THD at 1.0 Vrms output
Frequency response: at unity gain 2 Hz to more than 100Khz
Hum and noise: 98 db below 2.5 v
Tube complement: 1 x 6922
ET6 Optional Phono Stage
High Gain Version54dB
Low Gain Version40dB
RIAA Equalization:+/- .25 db 20Hz to 20kHz
Hum and Noise:-80dB relative to 10mV input
Phase: inverts phase of all inputs at main out
Tube Compliment:High Gain Version3x 12AX7
Low Gain Version 2x 12AX7, 1x 12AU7
Dimensions 16D x 19W x 3.75H inches
Total Weight 15 lbs.
We bought this Demo from the distributor. Normal price € 9.990,- now available at € 5.499,-
Important signal path capacitors are replaced by CJD’s own Teflon devices, and metal film resistors of super high tolerances replace the standard resistors on the PCB.
“The phono stage is a bit of a honey for an on-board design. Not only does it have provision for a wide range of cartridges, it’s extremely quiet in use, and deeply musically satisfying. It’s a lot more than simply an afterthought, and a separate phono preamplifier this good costs thousands in its own right”.
ET6SE Preamplifier Specifications
Gain: 25 db
Maximum output: 20 Vrms
Output impedance: 100 ohms
Distortion: less than .15% THD at 1.0 Vrms output
Frequency response: at unity gain 2 Hz to more than 100Khz
Hum and noise: 98 db below 2.5 v
Tube complement: 1 x 6922
ET6 Optional Phono Stage
High Gain Version54dB
Low Gain Version40dB
RIAA Equalization:+/- .25 db 20Hz to 20kHz
Hum and Noise:-80dB relative to 10mV input
Phase: inverts phase of all inputs at main out
Tube Compliment:High Gain Version3x 12AX7
Low Gain Version 2x 12AX7, 1x 12AU7
Dimensions 16D x 19W x 3.75H inches
Total Weight 15 lbs.
Seller:
- Shipping from Netherlands (1421xz)
- Purchaser pays shipping costs
- Worldwide shipping
Payment methods
- Cash upon collection
- Bank transfer
Advert ID
3972073309
Advert time period- Start:
- 10.03.2025 - 21:22
- End:
- 09.05.2025 - 21:22
69 times in 5 day(s)
